Network Settings Reset - Fujitsu ARROWS NX F-01K Instruction Manual

❖
Initializing an access point
By initializing an access point, the default state is restored.
1
From the Home screen,
[Wireless & networks]→[More]→[Cellular
networks]→[Access Point Names]
2
[MENU]→[Reset to default]
✔INFORMATION
･
You can delete access point one by one by tapping an access
point on the APN list screen→On the access point editing
screen, tap [MENU]→[Delete APN].

Network settings reset

Reset the network settings.
1
From the Home screen,
[Wireless & networks]→[More]→[Network
settings reset]
2
[RESET SETTINGS]→[RESET SETTINGS]
･
When you set security unlock preference requiring
authentication, authentication is needed.
→[Settings]→
→[Settings]→
137
Display & Wallpaper
Set screen brightness or auto-rotate screen.
1
From the Home screen,
[Display/Sound/Apps]→[Display & Wallpaper]
2
Set each item
Brightness level : Setting steps→P138
Adaptive brightness : Adjust brightness automatically
according to the ambient brightness based on the
brightness level specified in [Brightness level].
Auto-rotate screen : Set whether to rotate the screen
according to the terminal orientation.
･
Even when you change the orientation of the terminal,
the screen may not change depending on the screen
displayed.
Wallpaper : Setting steps→P59
Screen timeout : Setting steps→P138
Screen saver : Setting steps→P138
Font size : Change the font size.
Display size : Enlarge/reduce the size of the displayed
icons etc.
Screen/Music Cast : Setting steps→P179
Customize screen : Setting steps→P56
Homescreen selector : Setting steps→P57
Touch and go display : Setting steps→P139
Touch and sleep : Set to turn off the screen backlight by
tapping [Turn off screen] in the Notification panel.
Blue light cut mode : Set whether to cut down blue light
emitted from the screen.
→[Settings]→
Settings