Charging With Ac Adapter; Charging With A Pc - Fujitsu ARROWS NX F-01K Instruction Manual

❖
Available charging adapter
For details, refer to the manual of AC adapter, DC adapter, or
USB cable.
AC Adapter 06 (optional) : Supports 100V to 240V AC. The
shape of AC adapter plug is for 100V AC (Japanese
specification). A conversion plug adapter for the destination
country is required when using an AC adapter compatible
from 100V to 240V AC. Do not use an electrical transformer for
overseas use to charge the terminal.
DC Adapter 05 (optional) : Used to charge in a car. For using,
USB cable A to C 01 (optional) is required.

◆ Charging with AC adapter

Follow the procedure below to use AC Adapter 06 (optional)
for charging.
a Insert the Type-C plug of the AC adapter horizontally into
the USB Type-C jack of the terminal
b Insert the AC adapter power plug into an outlet
･
The indicator LED on the terminal lights up red while
charging, and turns off when charging is complete.
c When charging is complete, remove the AC adapter's
power plug from the outlet
d Remove the Type-C plug of the AC adapter horizontally
from the USB Type-C jack of the terminal
Type-C
plug
AC adapter

◆ Charging with a PC

You can charge the terminal via a PC using USB Cable A to C
01 (optional) etc.
･
When a screen of new hardware detection or operation
selection appears on the PC, select [キャンセル (Cancel)].
36
USB Type-C
jack
Indicator LED
To 100V
AC outlet
Power plug
Before using the terminal