Mfd & Pfd Message Advisories - Garmin G1000 Reference Manual

MFD & PFD MESSAGE ADVISORIES
Message
DATA LOST – Pilot stored data was
lost. Recheck settings.
XTALK ERROR – A flight display
crosstalk error has occurred.
PFD1 SERVICE – PFD1 needs
service. Return unit for repair.
PFD2 SERVICE – PFD2 needs
service. Return unit for repair.
MFD1 SERVICE – MFD1 needs
service. Return unit for repair.
MANIFEST – PFD1 software
mismatch, communication halted.
MANIFEST – PFD2 software
mismatch, communication halted.
MANIFEST – MFD1 software
mismatch, communication halted.
PFD1 CONFIG – PFD1 config error.
Config service req'd.
PFD2 CONFIG – PFD2 config error.
Config service req'd.
MFD1 CONFIG – MFD1 config
error. Config service req'd.
SW MISMATCH – GDU software
version mismatch. Xtalk is off.
Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT/GTi
190-00664-02 Rev. B
Annunciations & Alerts
Comments
The pilot profile data was lost. System reverts
to default pilot profile and settings. The pilot
may reconfigure the MFD & PFDs with preferred
settings, if desired.
The MFD and PFDs are not communicating with
each other. The system should be serviced.
The PFD and/or MFD self-test has detected a
problem. The system should be serviced.
The PFD and/or MFD has incorrect software
installed. The system should be serviced.
The PFD configuration settings do not match
backup configuration memory. The system
should be serviced.
The MFD configuration settings do not match
backup configuration memory. The system
should be serviced.
The MFD and PFDs have different software
versions installed. The system should be
serviced.
67