Garmin G1000 Reference Manual page 102

Annunciations & Alerts
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message
DB CHANGE – Database changed.
Verify stored airways.
LOCKED FPL – Cannot navigate
locked flight plan.
WPT ARRIVAL – Arriving at
waypoint -[xxxx]
STEEP TURN – Steep turn ahead.
INSIDE ARSPC – Inside airspace.
ARSPC AHEAD – Airspace ahead
less than 10 minutes.
ARSPC NEAR – Airspace near and
ahead.
ARSPC NEAR – Airspace near – less
than 2 nm.
APR INACTV – Approach is not
active.
SLCT FREQ – Select appropriate
frequency for approach.
SLCT NAV – Select NAV on CDI for
approach.
84
Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT/GTi
Comments
This occurs when a stored flight plan contains
an airway that is no longer consistent with
the aviation database. This alert is issued only
after an aviation database update. Verify use
of airways in stored flight plans and reload
airways as needed.
This occurs when the pilot attempts to activate
a stored flight plan that contains locked
waypoint. Remove locked waypoint from flight
plan. Update flight plan with current waypoint.
Arriving at waypoint [xxxx], where [xxxx] is the
waypoint name.
A steep turn is 15 seconds ahead. Prepare to
turn.
The aircraft is inside the airspace.
Special use airspace is ahead of aircraft. The
aircraft will penetrate the airspace within 10
minutes.
Special use airspace is near and ahead of the
aircraft position.
Special use airspace is within 2 nm of the
aircraft position.
The system notifies the pilot that the loaded
approach is not active. Activate approach when
required.
The system notifies the pilot to load the
approach frequency for the appropriate NAV
receiver. Select the correct frequency for the
approach.
The system notifies the pilot to set the CDI to
the correct NAV receiver. Set the CDI to the
correct NAV receiver.
190-00664-02 Rev. B