Camera Select; Record Select; Record Mode - Q-See DVR User Manual

Q-See Q25DVR4ES User's Manual
Chapter 5: DVR Setup - 5.2 Camera Select
The DVR system can display 4 camera feeds in one
picture (Quad Mode).
Users can configure which camera is displayed.
Press [
[
separately.
If the channel is disabled, the system will display
OFF
Chapter 5: DVR Setup - 5.3 Record Select
Configure which channels are allowed to record.
Note: If no channels are selected, an error message will appear briefly on
the screen when record is selected.
Chapter 5: DVR Setup - 5.4 Record Mode
There are two modes of resolution for video recording
1. Each Mode: The DVR compresses and records each video channel
separately so the user can enlarge a single channel to full screen display
and still be recording on all channels. You can also record on specific
channels, for example, user can turn off the record function of CH1 and
CH2 and then the system will only record video on CH3 and CH4.
Press [ CH1], [ CH2], [ CH3], [
when playing back recorded video.
In Each Mode user can use the Loop Function.
Loop Function: When the system is in Live mode or Recording mode, press the
Select] to modify setting and press [
CH2], [ CH3],[ CH4] to set each channel
on the monitor.
CH4] to switch between channels
Page 9
CH1],
1. Start Time.
3. TIME: Continuous record.
5. Un-played video recording.
Chapter 8: USB DVR Access - 8.1 Program Installation
1.Put the USB Driver Program CD in your CD-ROM Drive.
2.Open CD directory.
3.Double click on
4.Run the install DVR Viewer program.
To Run the program Double click the program icon [
DVR Viewer will detect the hard drive automatically when user connects
the USB cable to PC.
NOTICE: If the hard drive isn't detected, please restart and try the following:
1-Close the USB program window and remove the USB cable
2-Press [
Q-See Q25DVR4ES User's Manual
SEARCH TIME
1
2008/01/08 08:30:56 2008/01/08 16:00:35
01 TIME 2008/01/08 15:50:20
3
2008/01/08 14:30:56
* 02 TIME
03 TIME 2008/01/08 14:15:30
2008/01/08 14:00:15
* 04 TIME
* 05 MOTION 2008/01/08 13:55:37
5
2008/01/08 11:30:12
0 6 MOTION
07 MOTION 2008/01/08 10:15:30
4
08 MOTION 2008/01/08 08:30:55
(UP,DOWN) MOVE (PLAY) PLAY
(FF) SELECT MODE (SELECT) CHANGE
2. End Time.
4. MOTION: Motion Triggered event.
Set up .
] then reconnect the USB cable to the PC and try again.
Page 18
2
(MENU) EXIT
] on the desktop.