Auto Sequence Set; Record Setup - Q-See QSD2216 User Manual

5.3.3. AUTO SEQUENCE SET

When the cursor moves to Autoseq Set, please press enter button, the Auto Sequence Setup
window will appear.
Press the UP or DOWN button to select channel, press LEFT or RIGHT button to change the auto
Sequence time.

5.4 RECORD SETUP

When the cursor moves to Record Set, then press the Enter button, the Record Setup window will
appear, which is illustrated as below. Press UP or DOWN button to move the cursor. Then press
the LEFT or RIGHT button to change the value. While the DVR is in recording or playback mode,
you cannot access this menu unless you stop record or play first.
OVER WRITE: if set to "YES", the DVR will automatically overwrite the HDD from the
beginning when the HDD is full. If set to "NO", the DVR will automatically stop recording when
the HDD is full. If there are two HDD in the DVR, when the MASTER HDD is full, the video
will store to the SLAVE HDD, and when the SLAVE HDD is also full, the DVR will overwrite
the MASTER HDD if set this to "YES", otherwise it will stop recording.
20