Q-See QSD2216 User Manual page 32

6.8 Time Search
Move the cursor to Time Search, then press the Enter button and the Time search window will
appear, which is illustrated as below.
The red block below the number means there is recorded video at that time.
Press the LEFT and RIGHT buttons to move the cursor along the year, month, day, hour and
minutes.
Please note: You can only view footage that has been recorded. Therefore you must select time
and dates that have a red block below them.
6.9 Event Search
Move the cursor to Event Search, and then press the Enter button, the event search window will
appear, which is illustrated as below.
There are four types of event on this list: MOTION, ALARM, SCHEDULE and NETWORK.
MOTION means motion triggered alarm recording.
ALARM means external sensor triggered alarm recording.
SCHEDULE means scheduled time recording.
NETWORK means network activated recording.
Press the UP and DOWN buttons to move the cursor along the event list, and press the Enter
button to play the segment you selected. Press the search button to return to the Search menu.
32