Section 3 - Setup & Configuration; Getting Started; Software Utility; Software Installation - Omega DPG409 SERIES User Manual

3
Setup & Configuration
Section 3 – Setup & Configuration

3.1 Getting Started

This section outlines how to setup and configure your DPG409 Pressure Gauge
before installation and use. All configuration settings are set and saved into your
meter by connecting the included USB programming cable and running the
software utility that was included with your unit on your computer.

3.2 Software Utility

Your computer should meet the following minimum requirements:
• Pentium Class processor
• Hard Drive Space: 210 meg
• Ram: 256 meg or higher
• 1 Available USB Port
• An Internet Connection
• Windows 2000, XP, Vista (32bit) Operating System or Windows 7.

3.3 Software Installation

Download the Configuration Wizard software from ftp://ftp.omega.com/
public/DASGroup/products/dpg409/. To install run the setup.exe application.
This welcome screen will be visible on your computer. To continue installing the
program click the "Next >" button.
3-1
Figure 3-1. Software - Welcome Screen