Omega DPG409 SERIES User Manual page 47

6
Optional Wireless Transmitter Operation
Gauge Address
This sets a unique address number into your transmitter. Later, when you set up
your measurement software you will use this address setting to receive readings
from the corresponding unit(s). Each transmitter must be set for a different
address for your system to operate correctly.
Wireless Transmission Rate
This will program your device to transmit 1 data reading to your receiver at a
specified time interval. Available settings are 2, 3, 4, 5, 10, 15, 30, 45, 60, 75, 90,
105, or 120 seconds.
6-6