Table of Contents
Advertisement
Receiving a Distress Relay Call/Distress Re-
D
lay Acknowledgement
[Example]: Receiving a Distress Relay call.
When a Distress Relay call is received:
The emergency alarm sounds for 2 minutes.
➥
"RCVD DISTRESS RELAY" pops up and the backlight
➥
blinks.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
Push a softkey to select your desired action.
w
[IGN]
Push to return to the normal operating mode.
➥
• The transceiver exits the DSC mode.
• By pushing [PTT], the transceiver also exits the DSC mode.
• "
" continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information. (p. 58)
➥
[ACPT]
Push to accept the call.
➥
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
• Even if you haven't pushed [CH 16] within 10 seconds, the
operating channel automatically switches to Channel 16. (p.
61)
7
DSC OPERATION
Push
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
53
Advertisement
Table of Contents
