Table of Contents
Advertisement
4
BASIC OPERATION
Channel group selection
D
There are preprogrammed international channels for the IC-
M323/IC-M323G/IC-M324/IC-M324G. Except for the Europe
versions, you can select a channel group suitable for your
operating area, as described below.
Push [MENU].
q
Rotate Dial or push [
w
then push [ENT].
Rotate Dial or push [
e
then push [ENT].
10
∫]/[√] to select "Radio Settings," and
∫]/[√] to select "CHAN Group," and
Rotate Dial or push [
∫]/[√] to select the desired channel
r
group, and then push [ENT].
• U.S.A., (USA) International (INT), CAN (Canada), ATIS or DSC
channel groups may be selected, depending on the version.
Push [EXIT] to exit the Menu screen.
t
Push [
Y](CH)/[Z](CH) to select a channel.
y
• Pushing [Y]/[Z] on the microphone selects only Favorite chan-
nels.
• "DUP" appears when a duplex channel is selected.
• "A" appears when a simplex channel is selected.
Channel group icon appears
When the U.S.A. channel
group is selected.
Advertisement
Table of Contents
