Icom iM323 Instruction Manual page 59

Transmitting a Position Report Reply call (continued)
D
Manual Reply:
Enter "REPORT REPLY" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU]) (Rotate Dial, then push [ENT].)
• If no Position Report Request call has been received, the "Posi-
tion Report Reply" item will not be displayed.
•Push [EXIT] to return to the normal operating mode.
•Push [BACK] to return to the previous screen.
Select a desired Position Report Request call to reply to,
w
using Dial or [Y]/[Z], then push Dial or [ENT].
➪ Position Report Reply
The Position Report Reply call confirmation screen is dis-
e
played.
Push [CALL] to transmit the acknowledgement call.
While transmitting the reply call, the screen shown below
r
is displayed, and then returns to the normal operating
mode.
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
49