Table of Contents
Advertisement
Transmitting a Test Acknowledgement call
D
When the "TEST ACK" in DSC settings is set to 'Auto TX'
(p. 60), the transceiver automatically transmits a reply call
when receiving a Test call.
Quick ACK:
When a Test call is received, beeps sound and the screen
q
shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
• Push [EXIT] to return to the normal operating mode.
• Push [INFO] to display the Test call information.
About Received call information:
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
• Push [ACK] to go to the next step.
The Test ACK confirmation screen is displayed.
e
Push [CALL] to transmit the acknowledgement call.
While transmitting the acknowledgement call, the screen
r
shown below is displayed, and then returns to the normal
operating mode.
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
43
Advertisement
Table of Contents
