Icom iM323 Instruction Manual page 60

7
DSC OPERATION
Transmitting a Polling Request Reply call
D
Transmit a Polling Request Reply call when a Polling Request
call is received.
When the "POSITION ACK" in DSC Settings is set to 'Auto
TX' (p. 60), the transceiver automatically transmits a reply call
when receiving a Polling Request call.
Quick Reply:
When a Polling Request call is received, beeps sound and
q
the screen as shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
• Push [EXIT] to return to the normal operating mode.
• Push [INFO] to display the Polling Request call information.
50
About Received call information:
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
• Push [ACK] to go to the next step.
The Polling Request Reply confirmation screen is dis-
e
played.
Push [CALL] to transmit the reply call.
While transmitting the reply call, the screen shown below
r
is displayed, and then returns to the normal operating
mode.