Icom iM323 Instruction Manual page 47

Transmitting a Position Report Call
D
(U.S.A. and Australian version transceiver only)
Transmit a Position Report Call when you want to announce
your own position to a specific ship and receive an answer
back.
Enter "POSITION REPORT" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU]) (Rotate Dial, then push [ENT].)
Select the desired preprogrammed individual address, or
w
"Manual Input," using Dial or [Y]/[Z], then push Dial or
[ENT].
• The ID code for the Individual call can be set irst. (p. 20)
• When "Manual Input" is selected, set a desired 9 digit MMSI ID
code for the individual you wish to call.
➪ Position Report
About Manual Inputting:
Enter a desired individual ID in the following way:
• Select a desired number using Dial, or [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
• The irst digit is speciied as '0' for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
• The irst two digits are '0' for any coast station ID.
A confirmation screen appears.
e
• Conirm the call contents.
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
37