Icom iM323 Instruction Manual page 56

7
DSC OPERATION
Transmitting a Position Reply call (continued)
D
Manual Reply:
Enter "POSITION REPLY" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU])
• If no Position Request call has been received, the "Position Re-
ply" item will not be displayed.
•Push [EXIT] to return to the normal operating mode.
•Push [BACK] to return to the previous screen.
Select a desired Position Request call to reply to, using
w
Dial or [Y]/[Z], then push Dial or [ENT].
46
➪ Position Reply
(Rotate Dial, then push [ENT].)
The Position Reply call confirmation screen is displayed.
e
Push [CALL] to transmit the acknowledgement call.
While transmitting the reply call, the screen shown below
r
is displayed, and then returns to the normal operating
mode.