Omron CS1W-V680C11 User Manual page 19

 Combining ID Sensor Units and ID Controllers
The address maps in the RF Tags for the V680-D1KP@@ (except for the V680-D1KP58HT) are
reversed between the V680-CA1D/-CA2D ID Controller and CS/CJ1W-V680C1@ ID Sensor Units (with
RF Tag memory setting set to CA1D Mode for version 1.2 or newer), and the V680-CA5D01-V2 (ver-
sion 2.1 or older) ID Controller and CS/CJ1W-V680C1@ ID Sensor Units (with RF Tag memory setting
set to Standard Mode for version 1.2 or newer). Therefore, when you use RF Tags with a V680-CA1D/-
CA2D ID Controller, always set the RF Tag memory setting to CA1D Mode in any other models of ID
Controller or ID Sensor Units that are used for the same RF Tags.
V680-CA1D/-CA2D
CS/CJ1W-V680C1@
(Pre-version 1.2)
Reading/writing
OK
CS/CJ1W-V680C1@
(Version 1.2 or newer:
RF Tag memory setting
set to CA1D Mode.)
Address map in RF
Tags reversed.
Reading/writing
OK
CS/CJ1W-V680C1@
(Version 1.2 or newer:
RF Tag memory setting
set to Standard Mode.)
Features and System Configuration
SECTION 1
RFID System
17
User's Manual