Using Heat-Resistive Rf Tags (V680-D1Kp58Htn And V680-D1Kp58Ht) - Omron CS1W-V680C11 User Manual

Using Heat-resistive RF Tags (V680-D1KP58HTN
and V680-D1KP58HT)
This section provides information for using Heat-resistive RF Tags (V680-D1KP58HTN or V680-D1KP58HT).
If you are not using a Heat-resistive RF Tag, set the RF Tag memory setting to Standard Mode.
Precautions for Saving Data at High Temperatures
If you are using Heat-resistive RF Tags (V680-D1KP58HTN or V680-D1KP58HT), write the data again
after saving data at a high temperature even if it is not necessary to change the data. A " high tempera-
ture" is one between 110°C and 200°C.
Using a Controller for a Heat-resistant RFID System (V680-
CA1D/-CA2D)
If you are using Heat-resistive RF Tags (V680-D1KP58HTN or V680-D1KP58HT) and also using a
V680-CA1D/-CA2D ID Controller, set the RF Tag memory setting of the ID Sensor Unit (version 1.2 or
newer) to CA1D Mode.
A label on the side of the ID Sensor Unit shows the version for Units with version 1.2 or newer.
• CS1W-V680C1@
If you are not using the V680-CA1D/-CA2D, the RF Tag memory setting does not need to be changed.
Refer to information in System Configuration.
 Combining the V680-CA1D/-CA2D with Other V680-series Models
When using other models of Controller with the V680-CA1D/-CA2D, make sure that the version allows
setting the RF Tag memory setting to CA1D Mode.
To use the CS/CJ1W-V680C1@, it must be version 1.2 or newer.
To use the V680-CD5D01-V2, it must be version 2.3 or newer.
To use the V680-CH@D, it must be version 1.1 or newer.
A label on the side of the ID Sensor Unit shows the version for Units with version 1.2 or newer.
• CS1W-V680C1@
• CJ1W-V680C1@
Version
• CJ1W-V680C1@
Version
Features and System Configuration
Version
Version
SECTION 1
RFID System
15
User's Manual