In case of a defective appliance
A defective appliance can cause material damage and
injuries:
• Always check the appliance for damage before
use. In the event that you detect damage due to
transport, immediately contact the dealer where
you have purchased the appliance.
• Never operate a defective appliance. Never operate
an appliance that has fallen down.
• If the appliance's power cord is damaged, it must be
replaced with an original spare part by the manu-
facturer or their customer service department or a
similarly qualifi ed person to prevent hazards.
• The appliance does not contain any parts that you
can repair yourself. Repair work must only be carried
out through SEVERIN customer service department
(see "Customer service" on page 20).
8
3 Setting up the appliance
1. Remove all protective fi lms and other packaging material from the
appliance.
2. Set up the appliance in a place that fulfi ls the following conditions:
•
Near a shockproof socket (fuse at least 10 A)
•
Horizontal and free from vibration/shocks
•
Heat-resistant and insensitive to rubber coating
•
Away from heated or fl ammable surfaces and objects (> 1 m)
•
Away from walls (> 15 cm)
1 5 c
1 5 c
m
m
Fig. 2: Clearance around the appliance
3. Attach the drip tray with inserted drip grid to front of the appliance.
TIP:
The drip tray is held in place by magnets.
m
m
1 5 c
1 5 c
m
m
1 5 c
1 5 c
1 5 c
1 5 c
m
m