Cleaning The Surface; Troubleshooting; Remedying Problems Yourself - SEVERIN KV 8090 Operating Instructions Manual

10. Wait until LED flashes and button
11. Empty the container under the outlet.
12. Place container under the outlet again.
13. Remove the water tank, rinse and refill to MAX mark with cold tap water.
14. Re-insert the water tank.
 The LED stops flashing. The appliance completes descaling
and then automatically switches off.
15. Empty the container under the outlet.

6.5 Cleaning the surface

Clean the surface of the appliance with the provided cloth or another soft,
lint-free cloth.
16
as well as the LED are lit.

7 Troubleshooting

7.1 Remedying problems yourself

WARNING!
Risk of injury! The appliance does not contain any
parts that you can repair yourself.
– Never attempt to operate a defective appliance.
– Never attempt to repair the appliance by your-
self. If your appliance is defective, contact our
customer service department (see "Customer
service" on page 20).
Before contacting our customer service, check with the aid of the following
table whether you can remedy the problem by yourself.
Problem Cause
Water tank not
LED
inserted.
flashes
Only small
amount of
water in water
tank.
Only small
LED
amount of
flashes.
beans in bean
container.
Coffee chute is
soiled.
Remedy
Insert water tank properly, ►"Pre-
paring the appliance" on page 9.
Add water to the water tank, ►"Pre-
paring the appliance" on page 9.
Add coffee beans to bean container,
►"Preparing the appliance" on
page 9.
Clean the coffee chute, ►"Cleaning
the coffee chute" on page 15.