Introduction; Win5100 With External Antenna: Package Components And Unpacking; Win5200 With Integrated Antenna: Package Components And Unpacking - Siemens RUGGEDCOM WiN5200 User Manual

RUGGEDCOM WiN5100/WiN5200
User Guide

Introduction

This guide describes how to install and configure the RUGGEDCOM WiN5100-series and WiN5200-series Out
Door Unit (ODU) Customer Premises Equipment (CPE) units. The WiN5100-series and WiN5200-series ODU
CPEs are members of the RUGGEDCOM family, a line of WiMAX broadband wireless access systems based on
the 802.16e mobile WiMAX standard.
This guide is intended for installers and network operators. This manual assumes that users have some
experience with WiMAX technologies and procedures.
NOTE
While some safety precautions are reviewed here, this guide assumes that installers are trained in safe
installation practises. Users who are new to WiMAX technologies and service procedures should not
rely on this guide for comprehensive guidance.
Section 1.1
WiN5100 with External Antenna: Package
Components and Unpacking
• 1 × WiN5100-series ODU CPE with external antenna connectors
• RF cables - 5m (approximately 16')
• Power cable - 5m (approximately 16')
• Mounting kit
Section 1.2
WiN5200 with Integrated Antenna: Package
Components and Unpacking
• 1 × WiN5200-series ODU CPE with integrated directional dual slant antenna
• 1 × commercial grade power supply
WiN5100 with External Antenna: Package Components
and Unpacking
Chapter 1
Introduction
1