Siemens RUGGEDCOM WiN5200 User Manual page 89

RUGGEDCOM WiN5100/WiN5200
User Guide
Figure 70: General Statistics pane
2. View the CPE general information in the following fields:
Table: General Statistics fields
Field
CPE Name
MS ID
CPE Status
Up Time
BS ID
Frequency [kHz]
Bandwidth
Current SW version
Current Authentication
Outer NAI
Next re-authentication
General Statistics
Description
Displays the name of the CPE. This name identifies the CPE on the base station and
in the base station management interface. The name is set on the System Functions
pane. For instructions on how to set the name, see
Functions".
Displays the mobile station MAC address.
Displays the current CPE status.
Values: Init | DL Synchronization | Handover DL acquisition | UL Acquisition | Ranging |
Handover ranging | Capabilities negotiation | Authorization | Registration | DHCP | TOD |
TFTP | Operational | Sleep | IDLE | Aborted
Displays the time since the last CPE start-up.
Displays the base station MAC address.
Displays the CPE broadcast frequency, in kilohertz.
Displays CPE bandwidth setting.
Values: 3.5MHz | 5MHz | 7MHz | 10MHz
Displays the current CPE software version number.
Displays the current CPE authentication mode.
Values: Null | EAP-TTLS | EAP-TLS
Displays the outer network access identifier.
CPE Management Interface
Section 6.2.1, "Managing System
Chapter 6
81