Chapter 6
CPE Management Interface
In the options panel, click the Radius Login link. The Radius Login Settings pane appears.
2.
Figure 64: Radius Login Settings pane
3.
Review and set the parameters in the following fields:
Table: Radius Login
Field
Radius Login
Login AAA IP Address
Login AAA Port
Login AAA Secret
NAS ID
4.
Click the Apply button.
Section 6.3
CPE Network Configuration
This section describes how to:
• set the CPE LAN and RF IP settings. See
• set the CPE Ethernet settings. See
• set the Access List settings. See
Section 6.3.1
Network IP Settings
On the the IP Settings pane, configure the CPE's LAN and RF IP addresses.
74
Description
To set the Radius Login authentication mode, select a value from this list.
Values: Enable | Disable
The configured Web Login AAA Server IP Address. Type an IP address in this field.
The configured Web Login AAA Server Port. Type a value in this field.
The configured Web Login AAA Server Secret. Type a value in this field.
The Radius NAS Identifier. Type a value in this field.
Section 6.3.1, " Network IP Settings
Section 6.3.2, "Ethernet
Section 6.3.3, "Configuring the Access
".
Settings".
List".
RUGGEDCOM WiN5100/WiN5200
User Guide
CPE Network Configuration