Viewing Snmpv3 Access Groups; Mib2 System - Siemens RUGGEDCOM WiN5200 User Manual

Chapter 6
CPE Management Interface
Section 6.2.9.4

Viewing SNMPv3 Access Groups

The SNMPv3 Access Groups Configuration pane appears when you click the Access Groups button on the
SNMPv3 Configuration pane. On this pane, you can review the default SNMP v3 access groups.
Procedure: Viewing the SNMPv3 Access Groups
1. On the SNMPv3 Configuration pane, click the Access Groups button. The SNMPv3 Access Groups
Configuration pane appears.
Figure 57: SNMPv3 Access Groups Configuration
2. Review the SNMPv3 access groups in the Access Groups table:
Table: SNMPv3 Access Groups table
Field
Group Name
Read View
Write View
Notification View
Section 6.2.9.5

MIB2 System

The SNMP MIB2 settings provide subscriber station system identification information.
On the SNMP - MIB2 Settings pane, you set the subscriber station contact details, name, and street address.
This pane also displays the read-only SNMP system description, object identifier, system up time, and system
services values.
Procedure: Setting SNMP MIB2 system identification information
1. Click the Admin button. The Admin options appear in the options pane.
2. In the options panel, click the SNMP link, and then click the MIB2 System link. The SNMP - MIB2 Settings
pane appears.
66
Description
The access group name.
The read view for the access group.
The write view for the access group.
The notification view for the access group.
RUGGEDCOM WiN5100/WiN5200
User Guide
Viewing SNMPv3 Access Groups