Viewing Base Station Information - Siemens RUGGEDCOM WiN5200 User Manual

Chapter 6
CPE Management Interface
Section 6.5.3

Viewing Base Station Information

On the Mobility pane, you can view information about the base station serving the CPE and information about
neighboring base stations. The Mobility pane is read-only; there are no parameters to set on this pane.
Procedure: Viewing Base Station Information
1. Click the WiMAX button. The Scanner Settings pane appears.
In the options panel, click the Mobility link. The Mobility pane appears.
2.
Figure 80: Mobility pane
3. The Serving BS table displays information about the base station to which the CPE is connected:
Table: Serving BS table
Column
BSID
Preamble Index
Frequency
DL RSSI
UL RSSI
The Scanned Neighbor BS list table displays information about neighboring base stations detected by the
4.
CPE. This table displays the same information for neighboring base stations as that shown in
"Viewing Base Station
92
Description
Displays the MAC address of the base station to which the CPE is connected.
Displays the base station's preamble index.
Displays the base station frequency.
Displays the downlink RSSI (Received Signal Strength Indication).
Displays the uplink RSSI (Received Signal Strength Indication).
Information".
RUGGEDCOM WiN5100/WiN5200
User Guide
Section 6.5.3,
Viewing Base Station Information