Table of Contents
Advertisement
Agilent 34945A Microwave Switch/Attenuator Driver Module
User's Guide
1
About the Instrument
34945A Use Model
Equipment Inventory
Materials Included
Welcome. This manual contains component, configuration, and programming
information for the Agilent 34945A Micowave Switch/Attenuator Driver.
The 34945A controls and monitors RF/microwave switches and attenuators
used in applications such as wireless communications, avionics, medical
electronics, and in test and measurement systems. The 34945A is optimized for
use with the Agilent family of RF/microwave switches and attenuators.
The 34945A is a one slot plug-in module used with the Agilent 34980A
Multifunction Switch/Measure Unit.
Prior to using the 34945A, refer to this chapter for specific information on:
• the use model for the 34945A product and documentation
• materials (cables, hardware, software) supplied with the 34945A
• input power and operating/storage specifications
• supported Agilent RF/microwave switches and attenuators
• distribution boards and brackets required for using the switches and
attenuators in the RF switch platforms
• Y1157A - Y1159A control cable assembly instructions
2
3
3
3
4
6
7
9
12
Agilent Technologies
1
Advertisement
Table of Contents
