Switching Display Images; The Auto-Adjust Function; The Dtf-521 Power Saving Function; The Dtf-521 Display - Wacom DTF-521 User Manual

The DTF-521 Display

The Auto-Adjust Function

In order to ensure optimal display image quality, this product utilizes the Auto-Adjust function.
When the Auto-Adjust function is operating, it may take a short time before the screen displays
properly. The settings initiated by Auto-Adjust are saved in the display.
If the Auto-Adjust function is operating, the horizontal and vertical positions as
Hint
well as the phase and pitch of the display are adjusted automatically when the
display mode is received. The Auto-Adjust function becomes operational when
the horizontal frequency is in the 30-56.5KHz and the vertical frequency is in the
45-75Hz range.(When resolution is 1024 × 768 dot (XGA), vertical frequency is in
the 45-70Hz range)
Important

The DTF-521 Power Saving Function

This product is in compliance with VESA and ENERGY STAR power-saving guidelines. When
connected to a Display Power Management (DPMS)-compatible computer and graphics board, the
power savings indicated below are automatically realized during times of non-operation.
Computer Horizontal
Activity Synchronizing
Signal
Turned On Yes
Stand-by Mode No
Suspend Mode Yes
Off Mode No
* Depending on the specifications and settings of your computer and video
Caution
14
When the Auto-Adjust function is operating, only the power switch is
operational.
Vertical
Synchronizing
Signal
Yes
Yes
No
No
card, when in standby and suspend modes, the power lamp may only light
up orange.
Picture Power
Signal Consumption
Yes 23W or less
No Less than 2W
No Less than 2W
No Less than 1W
Power Lamp
Blue
Orange/Blue*
Orange/Blue*
Orange