Connecting Dtf-521 - Wacom DTF-521 User Manual

Connecting DTF-521

1
Turn off both your computer and the product.
2
Connect the Analog-RGB connector to your computer's display port.
3
Connect the power adapter to the power cable and connect the DC power connector to the DC power
input terminal. Next, plug the power cable into your electrical outlet.
Be sure to also connect a ground wire.
4
Turn on the product's power switch.
The power indicator lamp will light up orange.
5
Turn on your computer.
- Do not modify the refresh rate. Setting the rate to a value that exceeds the
Important
DTF-521 refresh rate may result in loss of picture.
- The color palette settings and corresponding number of colors displayed are as
follows:
High Color (16 bit) → 65,536 colors / True Color (24 bit) → Roughly 1,619 colors
*The number of colors is limited by the efficiency of your computer and video card.
For details, refer to the user's manual provided by the manufacturers.
6
While looking at the LCD screen, configure the color resolution and size settings.
7
Turn off your computer and the product.
8
Connect a USB connector of the product to a USB port of your computer using a USB cable.
9
Turn on your computer and the product.
10
Install the DTF-521 driver (Please refer to "Installing DTF-521 Driver" on page 12).
10