The Dti-520Ub Display; Switching Display Images; The Auto-Adjust Function; The Dti-520Ub Power Saving Function - Wacom DTI-520UB User Manual

The DTI-520UB Display

Switching Display Images

Either an image input from the RGB – RGB cable (see P. 11) or an image input from the
composite video cable will be displayed on the DTI-520UB. Either of these images can be
replaced by using the following method:
● Switch at the INPUT CONVERSION screen, which can be accessed from the menu screen.
( → P.18)
● Click on the ENTER button.( → P.16)
Hint:
If both the RGB – RGB cable and the composite video cable are connected, and then you
turn the unit on, the image input from the RGB – RGB cable takes priority and is displayed.

The Auto-Adjust Function

In order to ensure optimal display image quality, this product utilizes the Auto-Adjust function.
When the Auto-Adjust function is operating, it may take a short time before the screen displays
properly. The settings initiated by Auto-Adjust are saved in the display.
Hint: If the Auto-Adjust function is operating, the horizontal and vertical positions as well as the
phase and pitch of the display are adjusted automatically when the display mode is received.
The Auto-Adjust function becomes operational when the horizontal frequency is in the
30-56.5KHz and the vertical frequency is in the 45-75Hz range.(When resolution is 1024 × 768
dot (XGA), vertical frequency is in the 45-70Hz range).
Important:When the Auto-Adjust function is operating, only the power switch is operational.

The DTI-520UB Power Saving Function

This product is in compliance with VESA power-saving guidelines. When connected to a Display
Power Management (DPMS)-compatible computer and graphics board, the power savings
indicated below are automatically realized during times of non-operation.
Computer Horizontal
Activity Synchronizing
Turned On
Stand-by Mode
Suspend Mode
Off Mode
Caution:*Depending on the specifications and settings of your computer and video card, when
in standby and suspend modes, the power lamp may only light up orange.
14
Vertical
Synchronizing
Signal Signal
Yes Yes
No Yes
Yes No
No No
Picture Power
Signal Consumption
Yes 23W or less
No Less than 2W
No Less than 2W
No Less than 1W
Power Lamp
Blue
Orange/Blue*
Orange/Blue*
Orange