Repeating Defects; Skewed Print - Ricoh InfoPrint 1892 User Manual

Table of Contents

Advertisement

T
HE TONER IS LOW
When 88 Cartridge Low appears, order a new print cartridge.
T
HE PRINT CARTRIDGE MAY BE DEFECTIVE
Replace the print cartridge.

Repeating defects

)
)
)
R
EPEATING MARKS OCCUR EVENLY DOWN THE PAGE
Replace the charge rolls if the defects occur every 28.3 mm (1.11 in.).
Replace the transfer roller if the defects occur every 51.7 mm (2.04 in.).
Replace the print cartridge if the defects occur every:
47.8 mm (1.88 in.)
96.8 mm (3.81 in.)
Replace the fuser if the defects occur every:
88.0 mm (3.46 in.)
95.2 mm (3.75 in.)

Skewed print

These are possible solutions. Try one or more of the following:
C
HECK THE PAPER GUIDES
Move the guides in the tray to the correct positions for the paper size loaded.
C
HECK THE PAPER
Make sure you are using paper that meets the printer specifications.
R
EPLACE THE PHOTOCONDUCTOR KIT
Install a new photoconductor kit in case your existing part has become damaged by touching or impact.
)
Troubleshooting
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt 4864

Table of Contents