Table of Contents
Advertisement
Choose
To
Off
Use factory default settings for all settings associated with Eco-Mode. This setting supports the
performance specifications for your printer.
To select an Eco-Mode setting:
1
On the home screen, touch
2
Touch Settings.
3
Touch General Settings.
4
Touch Eco-Mode.
5
Touch the arrows to select a setting.
6
Touch Submit.
Adjusting Power Saver
To save energy, you can decrease the number of minutes before the printer enters Power Saver mode.
Available settings range from 1–240 minutes. The factory default setting is 30 minutes.
Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Settings, and then click General Settings.
3
Click Timeouts.
4
In the Power Saver box, type in the number of minutes you want the printer to wait before it enters Power Saver
mode.
5
Click Submit.
Using the printer control panel
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
3
Touch Settings.
4
Touch General Settings.
5
Touch the down arrow until Timeouts appears.
6
Touch Timeouts.
7
Touch the arrows next to Power Saver Mode to select the number of minutes you want the printer to wait
before it enters Power Saver mode.
8
Touch Submit.
9
Touch
.
.
.
Minimizing your printer's environmental impact
51
Advertisement
Table of Contents
