Table of Contents
Advertisement
General Features
Scanning Features
Scan Mode
Selects the scan operating mode for the scanner. Selections are:
•
Single — When the trigger is pulled, scanning is activated until
five seconds have elapsed or a bar code has been read or the trigger
is released
•
Triggerless — When the trigger is pulled, scanning is activated
until any of the following occur:
-
Active Scanning Time
- a bar code has been read
- the trigger is pulled a second time
The
Double Read Timeout
mode.
•
Stand — No trigger pull is required to read a bar code while in this
mode. Scanning is turned on automatically (auto-sense) when an
item is placed in the scanner's field of view and is turned off again
when a bar code is read or
Double Read Timeout
If the trigger is pulled, the scanner acts as if it is in single read
mode.
NOTE
•
Stand With Illumination — Same as the option above, except that
illumination is on while in this mode.
2-12
has expired
feature gates double reads while in this
Active Scanning Time
feature gates double reads while in this mode.
Upon exiting Single Read mode while Stand Mode
is enabled, the software will delay 2 seconds
before beginning its auto-sense operation.
PowerScan
has expired. The
®
7000 Linear Imager
Advertisement
Table of Contents
