Table of Contents
Advertisement
UPC-A
UPC-A — continued
START
STATE
BARCODE
This item is used to set the timer value when optional
add-ons are enabled. The selectable range is from
10 to 300 mSec in 10 mSec increments and is
entered in hex (01-0x1E by 01). To configure this fea-
ture, scan the "START" bar code above to place the
unit in Programming Mode, then the "Add-On Timer,"
followed by the hex digits from the Alphanumeric
table in
repre-
Appendix C, Alpha-Numeric Pad
senting the disired timer setting. Exit programming
mode by scanning the "END" bar code below.
Add-On Timer
DEFAULT SETTING FOR THIS FEATURE:
07 (70 milliseconds)
END
Product Reference Guide
5-7
Advertisement
Table of Contents
