Code 39 Length 1, Length 2 Programming Instructions - PSC LINEAR IMAGER 7000 Product Reference Manual

Code 39 Length 1, Length 2 Programming
Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Appendix C, Alpha-Numeric Pad
resenting the length in decimal notation.
For Code 39 bar codes, all check, data and full ASCII
shift characters are included in the length calculations.
Start/Stop characters are not included.
NOTE
4. Scan the END bar code.
SETTING
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 50 decimal
END
Product Reference Guide
BARCODE
DEFAULT SETTING FOR THIS FEATURE: 03
and scan the two digits rep-
Code 39
5-35