Table of Contents
Advertisement
BEFORE USING THE MACHINE►LOADING PAPER
Be sure to return the levers to the "normal pressure position" before printing or copying on paper
other than envelopes. Otherwise, fusing problems, paper misfeeds, or equipment failure may occur.
The fusing unit is hot. Take care not to burn yourself when operating the fusing unit pressure adjusting levers.
Loading paper
1
Do not place heavy objects on the bypass tray or press down on the tray.
2
3
Open the bypass tray and the
extension tray.
Push the center of the pressure plate
down until it locks into place.
Load the paper with the print side
facing down.
Insert the paper along the bypass tray guides all the way into the
bypass tray until it stops slowly. Inserting the paper with excessive
force may cause the leading edge to fold back. Inserting the paper
too loosely may cause skewed feeding or misfeeds.
The paper must not exceed the maximum number of sheets
and must not be higher than the indicator line.
1-72
Advertisement
Chapters
Table of Contents
