Table of Contents
Advertisement
SCANNER/INTERNET FAX►OTHER FUNCTIONS
Specify the destination.
4
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-15)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-18)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-19)
► ENTERING AN ADDRESS MANUALLY (page 5-20)
► SPECIFYING A NETWORK FOLDER (page 5-21)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-22)
► USING A TRANSMISSION LOG TO RESEND (page 5-24)
Tap the [Others] key, and tap the [Business Card Scan] key.
5
6
• If original count is enabled, the number of scanned originals will appear during scanning.
• Change the language setting to match the language used on the business card. For the language settings, refer to
"CHANGING FORMAT IN SCAN OR DATA ENTRY MODE (page
• To use the full name as the file name, enable [Use Full Name on Card as the File Name].
• You can only send using the file format shown in [Image]: [File Format of the Image]. (This is linked to the file format
selected in the format setting screen.)
You can only send using the file format selected in [Card Information]: [File Format of Card Info].
[Image and Card Info]: Send using the two file formats above.
► CHANGING FORMAT IN SCAN OR DATA ENTRY MODE (page
To cancel the business card scan setting
Tap the [Off] key.
Change settings as needed.
When you have completed the settings, tap the
then the [Back] key.
CA
Preview
Start
5-59)".
5-84
5-59)".
key and
Advertisement
Chapters
Table of Contents
