Vivotek FD9167-H User Manual page 298

VIVOTEK
aespeed
aespeedsupportlevel
aespeedsupportsensitivity
gammacurve
lowlightmode
focusassist
remotefocus
298 - User's Manual
0,1
<positive integer>
0,1
0,1
-,0,1
0,1
0,<positive integer>
* When "defog" = 0, this value must be
"-"
0/7 0: Non-support AE speed
1: Support AE speed
0/7 The value indicate the support
strength level of aespeed.
* Only available when
"capability_image_c<0~(n-1)>_aesp
eed" is 1.
0/7 0: Non-support tuning the sensitivity
of AE converge speed.
1: Support tuning the sensitivity of AE
converge speed.
* Only available when
"capability_image_c<0~(n-1)>_aesp
eed" is 1.
0/7 0: Non-support tuning Gamma curve
1: Support tuning Gamma curve
Internal parameter, must not open
0/7 -:
to user.
0: Non-support low light mode
1: Support low light mode
0/7 0: Non-support focus assist
1: Support focus assist
0/7 An 4-bit integer, which indicates the
supportive application of remotefocus
in this channel.
If the value of this parameter is larger
than 0, it means that the camera
supports remotefocus function in this
channel.
bit 0 => Indicate whether to support
both zoom and focus function.
bit 1 => Only support zoom
function.
bit 2 => Only support focus
function.
bit 3 => Currently, this is a reserved
bit, and the default value is 0.