Vivotek FD9167-H User Manual page 256

VIVOTEK
localstorage_supportedge
localstorage_slconnum
localstorage_smartsd
remotecamctrl_master
remotecamctrl_slave
fisheyelocaldewarp_c<0~
(capability_nvideoin)-1>
<product dependent>
shockalarm_support
256 - User's Manual
0, 0/7
<positive integer>
0,<positive integer> 0/7
<boolean> 0/7
0, <positive 0/7
integer>
<boolean> 0/7
0, <positive 0/7
integer>
<boolean> 0/7
An 32-bit integer, which indicates the
supportive application of edge storage.
If the value of this parameter is larger than 0,
it means that the camera supports edge
recording function.
bit 0 : It supports to record directly to an
on-board SD-Card.
bit 1~: Currently, they are reserved bit, and
the default value is 0.
* Only available when "capability_supportsd"
is 1 or "capability_storage_dbenabled" is 1.
The maximum seamless connection number.
* Only available when "capability_supportsd"
is 1 or "capability_storage_dbenabled" is 1.
The "Lifetime and Log SD Card" feature allows
users to obtain the card's remaining lifetime
information.
0: Non-support this feature
1: Support this feature
* Only Sony SD card can support this function
now.
* Only available when "capability_supportsd"
is 1 or "capability_storage_dbenabled" is 1.
Indicate whether to support remote auxiliary
camera (master side), this value means
supporting max number of auxiliary camera.
Indicate whether to support remote camera
control (slave side).
Indicate the supported streams of local
dewarp. One bit represents one supported
stream. The LSB indicates stream 0.
Ex: "3" means stream 0 and stream 1 support
local dewarp.
* Only available when "capability_fisheye" > 0
Indicate whether to support the shock
detection.
* We support this parameter when the version
number (httpversion) is equal or greater than
0306e.