Vivotek FD9167-H User Manual page 182

VIVOTEK
enablepreview
7.8.1 Video input setting per channel
Group: videoin_c<0~(n-1)> for n channel products, and m is stream number
n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"
NAME VALUE
cmosfreq 50, 60
mode 0 ~
"capability_videoin_c<0~(n-1)>_nm
ode"-1
whitebalance auto,
<product manual,
dependent> rbgain,
widerange,
outdoor,
indoor,
sodiumauto,
etc
(Available values are listed in
"capability_image_c<0~(n-1)>_wbm
ode")
182 - User's Manual
<boolean> 1/4
* Only available when
"capability_image_c<0~(n-1)>_exposure_m
axrange" != "-"
* Only valid when "piris_mode"=manual or
"irismode"=fixed
* Only available when
"capability_image_c<0~(n-1)>_exposure_ra
ngetype" is "twovalues".
Usage for UI of exposure settings. Preview
settings of video profile.
* Only available when
"capability_image_c<0~(n-1)>_exposure_m
ode" !=0
SECURITY DESCRIPTION
(get/set)
4/4 CMOS frequency.
* Only available when "
capability_videoin_type " is 2
4/4 Indicate the video mode on use.
4/4 Modes of white balance.
"auto": Auto white balance
"rbgain": Use rgain and bgain to set
white balance manually.
"manual": 2 cases:
a. if "rbgain" is not supported, this
means keep current white balance
status.
b. if "rbgain" is supported, "rgain"
and "bgain" are updated to the current
values which is got from white balance
module. Then, act as rbgain mode
"widerange": Auto Tracing White