Vivotek FD9167-H User Manual page 293

exposure_wintype
exposure_windomain
exposure_winnum
inclusive,
exclusive,
-
qvga, px, std, -
0, <Positive Integer>
"-" means no feature is affected.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1 and hlc is listed
in "capability_image_c<0~(n-1)>_
exposure_winmode".
* We support this parameter when the
version number (httpversion) is equal
or greater than 0304a.
0/7 The supported exposure window type.
"inclusive": The image inside a
window is the target area of exposure
control.
"exclusive": The image inside a
window is omitted by exposure
control.
"-": Not supported.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1.
0/7 The domain to set an exposure
window.
"qvga": a 320x240 range to
represent the whole image.
"px": Locate a window in the image
with pixels.
"std": A normalized 0~9999 range.
"-": Not supported.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1.
0/7 Indicate the number of custom
exposure windows.
* If no "custom" is listed in
"exposure_winmode", this should be
0.
* Only available when
VIVOTEK
User's Manual - 293