Table of Contents
Advertisement
sharpness
<Not recommended to use this>
brightnesspercent
contrastpercent
saturationpercent
sharpnesspercent
-3~3,100
4/4
0~100
4/4
0~100
4/4
0~100
4/4
0~100
4/4
"saturationpercent".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
-3: Softer <-> 3: Sharper
100: Use "
image_c<0~(n-1)>_sharpnesspercent"
* Only available when bit 3 of
"capability_image_c<0~(n-1)>_basicsetting"
is 1.
* We replace "sharpness" with
"sharpnesspercent".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
Set brightness in the normalized range.
0: Darker <-> 100: Bright
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicsetting"
is 1.
Set contrast in the normalized range.
0: Less contrast <-> 100: More contrast
* Only available when bit 1 of
"capability_image_c<0~(n-1)>_basicsetting"
is 1
Set saturation in the normalized range.
0: Less saturation <-> 100: More saturation
* Only available when bit 2 of
"capability_image_c<0~(n-1)>_basicsetting"
is 1.
Set sharpness in the normalized range.
0: Softer <-> 100: Sharper
* Only available when bit 3 of
"capability_image_c<0~(n-1)>_basicsetting"
VIVOTEK
User's Manual - 213
Hide quick links:
Advertisement
Table of Contents
