Vivotek FD9167-H User Manual page 200

VIVOTEK
dependent>
s<0~(m-2)>_fi '1O, 1P, 2P, 1R, 4R' for ceiling/floor
sheyedewarpmo mount
de '1O, 1P, 1R, 4R' for wall mount
<product <product dependent>
dependent>
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h264_smartstream2
capability_smartstream_version>=2.0)
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h265_smartstream2
capability_smartstream_version>=2.0 and h265 is listed in "capability_videoin_codec")
n denotes the value of "capability_nvideoin",m denotes the value of " capability_nmediastream"
NAME
enable
mode
qualitypriority
200 - User's Manual
VALUE
<boolean>
autotracking,manual,hybrid
-5,-4,-3,-2,-1,1,2,3,4,5
* Only available when
"capability_fisheye" > 0
1/4 Local dewarp mode.
"1O" is original mode (disable).
Supported dewarp mode is different by
mount type.
(videoin_c<0~(n-1)>_mounttype)
Supported mode list could be
extracted from
(capability_videoin_c<0~(n-1)>_local
dewarp_typeceilingmount) and
(capability_videoin_c<0~(n-1)>_local
dewarp_typewallmount)
* Only available when
"capability_fisheyelocaldewarp_c<0~(
capability_nvideoin)-1>" > 0
(capability_smartstream_support=1 and
(capability_smartstream_support=1,
SECURITY DESCRIPTION
(get/set)
4/4 Enable or Disable smart codec function
4/4 Set Smart stream mode
"autotracking": only available when
"capability_smartstream_mode_autot
racking" is 1.
"manual": only available when
"capability_smartstream_mode_manu
al" is 1.
"hybrid": only available when
"capability_smartstream_mode_hybri
d" is 1.
4/4 The differential value of Q between the
regions of interest (ROI) and the areas
of non-interest (non-ROI) of the
display image.