Vivotek FD9167-H User Manual page 193

d_enable
s<0~(m-1)>_h 250, 500, 1000, 2000, 3000, 4000
265_intraperiod
s<0~(m-1)>_h cbr, vbr
265_ratecontrol
mode
s<0~(m-1)>_h 1~5,
265_quant 99, 100
s<0~(m-1)>_h 0~51
265_qvalue
"capability_videoin_c<0~(n-1)>_dint
raperiod_support" is 1 and h265 is
listed in "capability_videoin_codec".
* We support this parameter when the
version number (httpversion) is equal
or greater than 0301c.
4/4 The time interval between two
I-frames (Intra coded picture).
The unit is millisecond (ms).
* Only available when h265 is listed in
"capability_videoin_codec".
4/4 cbr: Constant bit rate mode.
vbr: Fixed quality mode, all frames are
encoded in the same quality.
* Only available when h265 is listed in
"capability_videoin_codec".
4/4 Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"qpercent"
99: Use the quality level in "qvalue"
* Only available when h265 is listed in
"capability_videoin_codec" and
"ratecontrolmode"= vbr.
4/4 Manual video quality level input. The Q
value which is used by encoded library
directly.
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when "ratecontrolmode"=
vbr and s<0~(m-1)>_h265_quant =
VIVOTEK
User's Manual - 193