Vivotek FD9167-H User Manual page 192

VIVOTEK
s<0~(m-1)>_h 1~100
264_cbr_qperce
nt
s<0~(m-1)>_h 20000~"capability_videoin_c<0~(n-1
264_bitrate )>_h264_maxbitrate"
s<0~(m-1)>_h framerate,imagequality
264_prioritypoli
cy
s<0~(m-1)>_h 1~"capability_videoin_c<0~(n-1)>_h
264_maxframe 264_maxframerate"
s<0~(m-1)>_h 0~2
264_profile
s<0~(m-1)>_h <boolean>
264_smartq_en
able
s<0~(m-1)>_h <boolean>
265_dintraperio
192 - User's Manual
"2.0"
4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only valid when "ratecontrolmode"=
cbr and "quant"= 100.
* Only available when
"capability_smartstream_version">=
"2.0"
4/4 The target bit rate in constant bit rate
mode.
*
Only valid when "ratecontrolmode"=
cbr
4/4 Set prioritypolicy
*
Only valid when "ratecontrolmode"=
cbr
1/4 The maximum frame rates of a H264
stream at different
resolutions("capability_videoin_c<0~
(n-1)>_resolution") are recorded in
"capability_videoin_c<0~(n-1)>_h26
4_maxframerate"
1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
4/4 Enable "Smart Q" function.
* Only available when
"capability_videoin_c<0~(n-1)>_sma
rtq_support" is 1.
* We support this parameter when the
version number (httpversion) is equal
or greater than 0309a.
4/4 Enable "Dynamic intra frame period".
* Only available when