Vivotek FD9167-H User Manual page 253

camctrl_ptztunnel
camctrl_privilege
uart_httptunnel
transmission_mode
network_wire
network_wireless
network_dualmode
wireless_s802dot11b
wireless_s802dot11g
wireless_s802dot11n
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
Tx, 0/7
Rx,
Both
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
* It will be replaced by
capability_camctrl_ptztunnel.
Indicate whether to support ptztunnel.
* We support this parameter when the version
number (httpversion) is equal or greater than
0301b.
This equals
"capability_camctrl_c0_ptztunnel".
* This is kept for compatibility.
Indicate whether to support "Manage
Privilege" of PTZ control in the security page.
1: support both /cgi-bin/camctrl/camctrl.cgi
and /cgi-bin/viewer/camctrl.cgi
0: support only /cgi-bin/viewer/camctrl.cgi
This is equivalent
to"capability_camctrl_c0_privilege".
* This is kept for compatibility.
Indicate whether to support HTTP tunnel for
UART transfer.
Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
Indicate whether to support Ethernet.
Indicate whether to support wireless.
Indicate whether network dual mode is
supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when the version
number (httpversion) is equal or greater than
0305a.
Indicate whether to support wireless
802.11b+.
Indicate whether to support wireless 802.11g.
Indicate whether to support wireless 802.11n.
VIVOTEK
User's Manual - 253