Table Of Zones; Interpreting Zone Diagnostics - Avital 5303 Owner's Manual

➜

Table of zones

A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input
assignments are listed in the following table, along with spaces to
write in any optional sensors or switches that have been installed.
ZONE
(Number of
LED Flashes)
1
2
3
4
5
6
➜

Interpreting zone diagnostics

Warn Away responses are not reported by arming or disarming
diagnostics. If you receive a Bypass notification when arming or
a Tamper Alert notification when disarming, look at the LED.
Active or triggered zones will be indicated by a pattern of blinks
by the LED.
Example
If zone 3 was active or triggered, the LED will blink three times
with a two-second pause. Then it will blink three times again,
and repeat until the ignition is turned on.
© 2008 Directed Electronics—All rights reser ved
DESCRIPTION
Trunk Pin
Instant trigger - a heavier impact
detected by the shock sensor
Door switch trigger
Instant trigger - for optional
sensors
Ignition trigger
Hood Pin
DEALER-INSTALLED
OPTIONS
27