Wireless Settings; Wireless - 3Com 3CRWEASYG73 User Manual

Wireless Settings

Wireless

3Com Corporation
The Wireless Setup consists of two pages: Radio and Advanced. Radio part
shows the basic settings of radio channel, and Advanced page shows the
advanced information. (e.g. Beacon Interval is 100)
Figure 25 – Wireless Setup
Country – Shows this bridge is set to the regulatory requirements of that country.
This item is read only. [North American version of the Bridge only has settings for
FCC conformity]
Regulatory domain – This is the organization that certifies the Wireless Bridge for
use in your country. It determines which radio channels can be used to transmit and
receive signals. This is a factory setting and cannot be changed.
Wireless network name (SSID) – is a unique name for your wireless network [1-32
characters]. The default SSID is "3Com" you should change this to a personal
wireless network name. The SSID is important to identify bridge to bridge
connections when choosing TKIP PSK or AES PSK as the security type. All client
bridges must have their client SSID settings configured and must use the same
SSID in the same channel.
Radio Channel – select the channel that the bridge uses to transmit and receive
information. Multiple frequency channels are used to avoid interference between
nearby bridges/devices. If you wish to operate more than one bridge in overlapping
coverage areas, we recommend a distance of at least four channels between the
chosen channels. For example, for three bridges in close proximity choose
channels 1, 6 and 11.
Radio
17
Page 43