Hardware Specification - 3Com 3CRWEASYG73 User Manual

Hardware Specification

Interface
Ethernet Interface
Wireless
Standard
Data Rate
Indoor: 3CRWE920G73
Antenna connector
Outdoor: 3CRWEASYG73
Integrated Antenna
Physical Specification
Outdoor: 3CRWEASYG73
Dimension
Weight
Indoor: 3CRWE920G73
Dimension
Weight
Environment Specification
Outdoor: 3CRWEASYG73
Temperature
Humidity
Indoor: 3CRWE920G73
Temperature
Humidity
Power Supply
Power Adaptor
Spec.
Mechanical Specification
Outdoor: Ruggedized IPX4 and flame-resistant plastic housing, wall or mast mount
Indoor: Ruggedized and flame-resistant plastic housing and plate that allows for placement on a wall, theft
protection
LEDs
3 LEDs
Management
Interfaces
Software Update
Test
Reset
Warranty
1 year
3Com Corporation
10/100 base-T RJ-45 Ethernet port for connection to LAN
IEEE 802.11b & 802.11g simultaneously (2.4GHz ISM band)
1, 2, 5.5 and 11Mbps (Auto scaling), 6, 9, 12, 18,24, 36, 48 and 54 Mbps
Standard SMA
integrated 18dBi directional panel antenna, 19° beam width vertical and
horizontal, vertical polarization
380 x 352 x 75mm / 14.9 x 13.8 x 3 in (L x W x D)
3.1Kg （includes mounting kit）
123 x 85 x 38mm / 4.8 x 3.3 x 1.5 in (L x W x D)
350g （includes mounting kit）
-33℃ to 50℃
Up to 95%
-20℃ to 65℃
Up to 95%
Power-over-Ethernet IEEE 802.3af compliant power injector
INPUT: AC 100-240V ~ 50-60Hz 500mA
OUTPUT: DC 48V 400mA
RF activity, LAN activity, Power (Indoor only)
HTTP, SNMP (Ethernet MIB, Bridge MIB, private MIB)
Remote Software Update via HTTP/TFTP
Integrated site survey. Loop-back test
Remote reset / Manufacturing reset
Page 76