Table of Contents
Advertisement
Upgrade Firmware via FTP
3Com Corporation
Before you upgrade via FTP, you should be sure that the FTP Server which you
assigned is in service first. If it is not, the upgrade will not be successful and may
damage the bridge.
Figure 47 – Upgrade Firmware via FTP
FTP Server IP Address - The FTP Server's IP Address.
File Name - The configure file's name you backup or restore.
User Name - This user point to the ftp server account.
Password - User's password.
Apply - Apply the FTP Server Settings.
Upgrade - Upgrade Firmware image.
When the upgrade is completed successfully, a confirmation message will appear
and the bridge restarts.
Do not switch off and do not disconnect the Wireless Bridge from the power supply
during the firmware upgrade process as this will damage the device.
Page 64
Advertisement
Table of Contents
