Table of Contents
Advertisement
1. Installation personal
This product is designed for specific application and needs to be installed by a
qualified personal who has RF and related rule knowledge. The general user shall
not attempt to install or change the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept
20 cm from nearby person in normal operation condition to meet regulatory RF
exposure requirement.
3. Effective power output
According to US Rule, CFR 47 part 15
902 - 928 MHz, 2400 - 2483.5 MHz, and 5725 - 5850 MHz", the
peak conducted output power at antenna terminal
procedure as described in the rule part. Please refer to the related rules for detail.
4. Installation procedure
Please refer to user's manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the final output
power does not exceed the limit set forth in US Rule CFR 47 part 15 section
15.247. The violation of the rule could lead to serious federal penalty.
Professional installation instruction
Section 15.247 "Operation within the bands
is 1 watt, per the measurement
authorized
maximum
Advertisement
Table of Contents
